S64DIL-053 STM32L053 ARM Cortex M0+ microcontroller module with USB interface

S64DIL-053 is a tiny interface module for an STM32L053 micro controller with USB interface in LQFP64 casing. The module fits to an ordinary 64 pin dual-in-line socket. The module is helpful in experiments, development and prototyping with ARM Cortex M0+ microcontrollers. assembled with ST Microelectronics STM32L053R8T7 microcontroller, 64kByte flash memory, 2kByte EEPROM, 8kByte SRAM, max. 32MHz clock frequency standard 64 pin dual-inline format (0.9 inch row distance) any microcontroller port (USB data and clock optional) is available by the dual in line pins flexible power supplement by USB or external, 3.3V regulator on board oscillator socket onboard (suitable for crystal, 2- and 3-pin ceramic resonator) all components for basic operation onboard (such as resistors and buffer capacitors) ESD protected Mini-USB connector (JTAG/)SWD connector for in-system programming and debugging (20 pin JTAG standard) directly supported by all Cortex M development environments The module can be applied in any development system, such as the free Ac6 System Workbench for STM32. For In-System-Programming and debugging the low cost ST-Link/V2 and all the compatible devices (such as Segger J-Link) can be used. The microcontroller can be programmed in the following ways: By the serial interface (3.3V levels!) the present bootloader and the DfuSe software from ST. Programming and debugging by SWD interface and a suitable debugging device such as ST-Link/V2 Further information: detail view schematic

You will find an overview about all STM32 modules here...

• Microcontroller: STM32L053R8T7
• 64kByte flash memory, 2kByte EEPROM, 8kByte SRAM
• supply voltage: 3.3V (required voltage regulators onboard)
• clock frequency: 8MHz, or 16MHz (necessary for proper USB operation), internal clock up to 32MHz
• 3 pin oscillator socket, delivered with 8.000MHz crystal
• 32.768kHz RTC crystal on board
• programmable over the (JTAG/)SWD connector and via serial interface
  
• mini-USB connector
• 20 pin JTAG/SWD connector
• precision contact 64 pin connector for dual-inline socket
• PCB dimensions: 81,28 x 25,4 mm² (3,2" x 1,0")

The S64DIL-053 module is available as assembled and approved device or as construction kit, equipped with STM32L053R8T7. Please note, that the construction kit will be delivered unchecked. 

PCB (not assembled) the basic material	Construction Kit assemble what you need	Device checked and ready to use
This set contains: printed circuit board (current revision), not assembled	This set contains: printed circuit board, assembled with STM32L053R8T7 and all SMD components (unchecked) all wired components and jumpers crystal 8.000MHz	This set contains: assembled and approved device (full equipped) with STM32L053R8T7 crystal 8.000MHz jumpers
Price: Euro 10.00	Price: Euro 25.00	Price: Euro 26.00
Shipping cost category: A	Shipping cost category: B	Shipping cost category: B
Order number: SXD01	Order number: S6D08	Order number: S6D09
deliverable	on request	deliverable
USB Cable suitable for the device	IC socket suitable for the device
Technical data: plug USB-A plug USB-mini USB 2.0 length 1.8m	IC socket 64 pins precision contact
Price: Euro 2.00	Price: Euro 3.70
Shipping cost category: B	Shipping cost category: B
Order number: UXD02	Order number: USD64
deliverable	deliverable

All prices inclusive german VAT, without shipping.

Shipping costs are calculated as real costs.

You can order via E-Mail or FAX. Please give Your invoice and delivery address.

Delivery is only possible by prepayment! You will get a preliminary invoice as PDF file via E-Mail, which contains bank transfer and Paypal information. After payment the goods will be delivered.

We apologize, that we can't offer you a more comfortable way for order and payment in the moment.

More informationen about order and payment...

The following free downloads are available:

You will find information and downloads for software modules and drivers with the following links.