U6DIL

Atmel AT90USB1286, AVR microcontroller module with USB interface

 

Introduction

U6DIL is a tiny interface module for an Atmel AVR micro controller with USB interface in TQFP64 casing. The module fits to an ordinary 64 pin dual-in-line socket (with 0.9 inch pin row distance). The module is helpful in experiments, development and prototyping with USB-AVR microcontrollers.
  • assembled with Atmel AVR microcontroller AT90USB1286
  • standard 64 pin dual-inline format (0.9 inch row distance)
  • any microcontroller port (except USB data and oscillator) is available by the dual in line pins
  • flexibel power supplement by USB or external
  • oscillator socket onboard (suitable for crystal, 2- and 3-pin ceramic resonator)
  • all components for basic operation onboard (such as resistors, buffer capacitors and reset button)
  • ESD protected Mini-USB connector
  • in-system programming (6 pin Atmel ISP standard)
  • directly supported by AVR Studio 4 and 5

The module can be applied in any development system, such as Atmel AVR Studio, WinAVR and IAR Embedded Workbench® for Atmel AVR.

For In-System-Programming the Atmel AVRISP MKII and all the compatible devices can be used.

The microcontroller can be programmed in three ways:

  • By the USB interface with the present bootloader and the application program "Flip" from Atmel.
  • By the in-system programming connector on the board and a suitable programming device, such as Atmel AVRISP MKII (or compatible).
  • Programming and debugging by JTAG interface and a suitable debugging device such as Atmel AVRJTAG MKII (or compatible such as Kee AVR JTAG MKII from Kee Electronics). The required ports are available by the DIL pins.

Further information:

 

You will find an overview about all USB-AVR modules here...

Technical Data

Products and Prices

The U6DIL module is available as assembled and approved device or as construction kit, equipped with AT90USB1286. Other controllers (such as AT90USB646, 647, 1287) on request. Please note, that the construction will be delivered unchecked. 

PCB (not assembled)

the basic material

Construction Kit

assemble what you need

Device

checked and ready to use

This set contains:
  • printed circuit board (current revision),
    not assembled
This set contains:
  • printed circuit board,
    assembled with AT90USB1286 and all SMD components (unchecked)
  • all wired components
  • crystal 16.000MHz
This set contains:
  • assembled and approved device (full equipped) with AT90USB1286
  • crystal 16.000MHz
Price: Euro 10.00 Price: Euro 29.00 Price: Euro 30.00
Shipping cost category: A Shipping cost category: B Shipping cost category: B
Order number: U6D01 Order number: U6D02 Order number: U6D03
deliverable out of stock deliverable

USB Cable

suitable for the device

IC socket

suitable for the device

 

 
Technical data:
  • plug USB-A
  • plug USB-mini
  • USB 2.0
  • length 1.8m
IC socket
  • 64 pins
  • precision contact
 
Price: Euro 2.00 Price: Euro 2.50  
Shipping cost category: B Shipping cost category: B  
Order number: UXD02 Order number: USD64  
deliverable deliverable  

All prices inclusive german VAT, without shipping.

Shipping costs are calculated as real costs.

How to order and pay

You can order via E-Mail or FAX. Please give Your invoice and delivery address.

Order by E-Mail:
Order by FAX: +49-7541-81483

Delivery is only possible by prepayment! You will get a preliminary invoice as PDF file via E-Mail, which contains bank transfer and Paypal information. After payment the goods will be delivered.

We apologize, that we can't offer you a more comfortable way for order and payment in the moment.

More informationen about order and payment...

Downloads

The following free downloads are available:

Description

Revision

File Size

Download

Manual (english), PDF file 18 (2011-03-31) 2.2 MByte U6DIL_Manual.pdf
Programming Examples beta 2 (2011-08-02) 6.1 MByte UxDIL_Source_Beta2.zip
Module Test: Software to check the ports and the USB communication
Software for Windows® including drivers and firmware files for all supported microcontrollers
(Windows 7 to 10)
1.8.1 (2019-01-03) 7.8 MByte Setup_UxDIL_Check.exe
Atmel FLIP driver for 64Bit Windows 3.4.2 161 kByte atmel-flip-3.4.2-signed-driver.zip
Microsoft USBView for Windows 5.0.1.1 96 kByte usbview.exe
Microsoft USBView for Windows 6.0.6000.16386 77 kByte usbview_V6.exe

The purchase of a kit or assembled device contains access to an extended software library
(in preparation, not available yet).

Links

You will find information and downloads for software modules and drivers with the following links.

How to reflash Atmel bootloader (local)

Atmel AVR Tools and Software

http://www.atmel.com/dyn/products/tools_mcu.asp?family_id=607

Atmel Corporation, AVR data sheets

http://www.atmel.com/dyn/products/datasheets_mcu.asp?family_id=607

Atmel Application Note AVR282: Information about "Atmel FLIP" http://www.atmel.com/dyn/resources/prod_documents/doc7769.pdf

Dean Cameras LUFA

http://www.fourwalledcubicle.com/LUFA.php

Teensy USB Development Board

http://www.pjrc.com/teensy/

V-USB, Virtual USB Port for AVR microcontroller http://www.obdev.at/products/vusb/index.html 
WinAVR, GCC development environment http://winavr.sourceforge.net/
LibUSB-Win32, USB drivers for Microsoft Windows ® http://libusb-win32.sourceforge.net/