X3DIL

Atmel ATXMEGA256A3U / A3BU, AVR microcontroller module with USB interface

 

Introduction

X3DIL is a tiny interface module for an Atmel AVR micro controller with USB interface in TQFP64 casing. The module fits to an ordinary 64 pin dual-in-line socket (0.9inch pin row distance). The module is helpful in experiments, development and prototyping with USB-AVR microcontrollers.
  • assembled with Atmel AVR microcontroller ATXMEGA256A3U respectively ...A3BU
  • standard 64 pin dual-inline format (0.9 inch row distance)
  • any microcontroller port (USB data optional) is available by the dual in line pins
  • flexible power supplement by USB or external, 3.3V regulator on board
  • oscillator socket onboard (suitable for crystal, 2- and 3-pin ceramic resonator)
  • USB operation also possible with internal RC oscillator (no crystal required)
  • all components for basic operation onboard (such as resistors and buffer capacitors)
  • ESD protected mini-USB connector
  • in-system programming (6 pin Atmel PDI standard)
  • directly supported by AVR Studio 5 (Version 5.1 or higher recommended)

For In-System-Programming the Atmel AVRISP MKII and all the compatible devices can be used.

For programming and debugging the Atmel AVR JTAG MKII and Atmel JTAGICE3 (firmware V1.34 or higher) are suitable.

The microcontroller can be programmed in three ways:

  • By the USB interface with the present bootloader and the application program "Flip" from Atmel.
  • By the in-system programming connector on the board and a suitable programming device, such as Atmel AVRISP MKII (or compatible).
  • Programming and debugging by PDI or JTAG interface and a suitable debugging device such as Atmel AVRJTAG MKII (or compatible such as Kee AVR JTAG MKII from Kee Electronics).

Further information:

 

You will find an overview about all USB-AVR modules here...

Technical Data

Products and Prices

The X3DIL module is available as assembled and approved device or as construction kit, equipped with ATXMEGA256A3U. Please note, that the construction will be delivered unchecked.

PCB (not assembled)

the basic material

Construction Kit ...256A3U

assemble what you need

Device ATXMEGA256A3U

checked and ready to use

This set contains:
  • printed circuit board (current revision),
    not assembled
This set contains:
  • printed circuit board,
    assembled with ATXMEGA256A3U and all SMD components (unchecked)
  • all wired components
  • crystal 16.000MHz

Hint: The microcontroller doesn't contain a bootloader!

This set contains:
  • assembled and approved device (full equipped) with ATXMEGA256A3U
  • crystal 16.000MHz
  • microcontroller with bootloader
Price: Euro 10.00 Price: Euro 29.00 Price: Euro 30.00
Shipping cost category: A Shipping cost category: B Shipping cost category: B
Order number: X3D01 Order number: X3D02 Order number: X3D03
deliverable deliverable deliverable

Construction Kit ...256A3BU  new!

assemble what you need

Device ATXMEGA256A3BU  new!

checked and ready to use

USB Cable

suitable for the device

This set contains:
  • printed circuit board,
    assembled with ATXMEGA256A3BU and all SMD components (unchecked)
  • all wired components
  • crystal 16.000MHz

Hint: The microcontroller doesn't contain a bootloader!

This set contains:
  • assembled and approved device (full equipped) with ATXMEGA256A3BU
  • crystal 16.000MHz
  • microcontroller with bootloader
Technical data:
  • plug USB-A
  • plug USB-mini
  • USB 2.0
  • length 1.8m
Price: Euro 29.00 Price: Euro 30.00 Price: Euro 2.00
Shipping cost category: B Shipping cost category: B Shipping cost category: B
Order number: X3D04 Order number: X3D05 Order number: UXD02
deliverable (small stock) deliverable deliverable

IC socket

suitable for the device

   
   
IC socket
  • 64 pins
  • precision contact
   
Price: Euro 2.50    
Shipping cost category: B    
Order number: USD64    
deliverable    

Atmel delivers the microcontroller with erased memories. For this reason, the kit comes without programmed bootloader.

All prices inclusive german VAT, without shipping.

Shipping costs are calculated as real costs.

How to order and pay

You can order via E-Mail or FAX. Please give Your invoice and delivery address.

Order by E-Mail:
Order by FAX: +49-7541-81483

Delivery is only possible by prepayment! You will get a preliminary invoice as PDF file via E-Mail, which contains bank transfer and Paypal information. After payment the goods will be delivered.

We apologize, that we can't offer you a more comfortable way for order and payment in the moment.

More informationen about order and payment...

Downloads

The following free downloads are available:

Description

Revision

File Size

Download

Manual (english), PDF file 5 (2017-03-03) 1.3 MB X3DIL_Manual.pdf
Module Test: Software to check the ports and the USB communication
Software for Windows® including drivers and firmware files for all supported microcontrollers
(Windows 7 to 10)
1.8.1 (2019-01-03) 7.8 MByte Setup_UxDIL_Check.exe
Atmel FLIP driver for 64Bit Windows 3.4.2 161 kByte atmel-flip-3.4.2-signed-driver.zip
Microsoft USBView for Windows 5.0.1.1 96 kByte usbview.exe
Microsoft USBView for Windows 6.0.6000.16386 77 kByte usbview_V6.exe

Links

You will find information and downloads for software modules and drivers with the following links.

How to reflash Atmel bootloader (local)

Atmel AVR Tools and Software

http://www.atmel.com/dyn/products/tools_mcu.asp?family_id=607

Atmel Corporation, AVR data sheets

http://www.atmel.com/dyn/products/datasheets_mcu.asp?family_id=607

Atmel Application Note AVR282: Information about "Atmel FLIP" http://www.atmel.com/dyn/resources/prod_documents/doc7769.pdf

Dean Cameras LUFA

http://www.fourwalledcubicle.com/LUFA.php

Teensy USB Development Board

http://www.pjrc.com/teensy/

V-USB, Virtual USB Port for AVR microcontroller http://www.obdev.at/products/vusb/index.html 
WinAVR, GCC development environment http://winavr.sourceforge.net/
LibUSB-Win32, USB drivers for Microsoft Windows ® http://libusb-win32.sourceforge.net/